Experimental and Numerical Investigation of Heat Transfer of TiN/TiCN/TiC Deposited on Cp-Ti and Ti6Al4V substrates materials

Authors

  • Abbas Razmi
  • Ruhi Yeşildal
  • Mansour Nasiri Khalaji

Keywords:

Cp-Titanium, Ti6Al4V, TiN/TiCN/TiC, Heat transfer, ANSYS Fluent, Numerical Analysis

Abstract

Experimental and numerical analysis on heat transfer characteristics of TiN/TiCN/TiC coating was investigated in this study. The TiN/TiCN/TiC coating was deposited on commercially pure Titanium (Cp-Ti) and Ti6Al4V substrates using a magnetron sputtering technique. The structural and chemical characterization of the coating was analyzed by X-ray diffraction (XRD). Results of the XRD analysis showed reflections corresponded to cubic and polycrystalline structure for TiN/TiCN/TiC films. Test specimens were placed in the heat conduction equipment and heat analyzes were performed experimentally. In addition to experimental investigation, numerical studies of coated substrate materials have been performed under the same experimental conditions with the ANSYS Fluent program.

Downloads

Published

2019-06-23

Issue

Vol. 3 No. 1 (2019): The Joseph Fourier Issue

Section

Articles

License

The authors keep the copyrights of the published materials with them, but the authors are aggee to give an exclusive license to the publisher that transfers all publishing and commercial exploitation rights to the publisher. The puslisher then shares the content published in this journal under CC BY-NC-ND license.

How to Cite

Experimental and Numerical Investigation of Heat Transfer of TiN/TiCN/TiC Deposited on Cp-Ti and Ti6Al4V substrates materials. (2019). International Journal of Innovative Research and Reviews, 3(1), 1-5. https://www.injirr.com/article/view/24